PAB-5240 240W Pure Power Amplifier

Name: PAB-5240 240W Pure Power Amplifier
Brand: BXB
SKU: PAB-5240

240W pure power amplifier, featuring dual-channel and bridge modes, suitable for sound reinforcement in small to medium-sized conference rooms.

This model is discontinued, recommended replacement model: PAB-5400-D。

・Maximum output of 120W per channel, suitable for sound reinforcement in small to medium-sized conference rooms.

・Bridge mode provides 240W output, supporting 70V or 100V constant voltage speakers.

・Automatically enters standby mode after 15 minutes of no audio signal, with standby power consumption under 0.5W.

・Equipped with a high-pass filter switch to block bass below 80Hz and prevent interference.

・Equipped with a 12VDC trigger port for remote control by external devices.

・Features dual protection against short circuits and overheating; fanless design is suitable for long-term operation.

View New Replacement Products Available Now Maintenance & Technical Support for Existing Equipment

New Replacement Products Available Now

PAB-5240 has been discontinued. For new projects or replacements, we recommend using the models below. For repair, compatibility, and expansion inquiries regarding existing equipment, please click "Repair & Technical Support for Existing Equipment" above.

PAB-5400-D

Pure Power Amplifier

View All Public Address & Emergency Notification Products →

Introduction to Amplifiers

This model is an amplifier. Please refer to the series introduction to see how the system works, where it is used, and how to operate it.

View Amplifier Introduction →

Specifications

Output Power	120W@8Ω<1% THD+N / 120W@4Ω<1% THD+N / 240W Bridged 70V/100V <1% THD+N
Frequency Response	20Hz-20kHz, +/- 2dB@4Ω Load
S/N Ratio	>90dB@1W (20Hz-20kHz)
Input Sensitivity	1V (+2.2dBu)@Max Output 4Ω
Voltage Gain	25dB@4Ω
Input Impedance	>10k, Balanced
Maximum Input Level	12.3V (+24 dBu)
Trigger Voltage	DC12V
High-Pass Filter	80Hz (±2dB)
Input	5-pin Euroblock Terminal Block
Trigger Port	3.5mm Jack
Output	4-pin Euroblock terminal block (4Ω/8Ω) / 2-pin Euroblock terminal block (70V/100V)
Dimensions (W x H x D)	214 x 44 x 250 mm
Net Weight	1.88kg
Rack Mount	19" 1U
Power Supply	AC 100~240V, 50-60Hz
Power Consumption	350W